Electrical work in a city like Dover covers a wide range. A single dead outlet is worth a call. A full house rewire is worth a call. The range between those two points is where most of the work lives, and we handle all of it - repairs, panel upgrades, new circuits, wiring, lighting, generator hookups, and EV charger installation for homes and businesses throughout Dover and Strafford County. When you call, a real person answers.
We work with homeowners dealing with aging wiring, property managers keeping rental units up to code, and contractors who need an electrician on site at the right stage of a build. Whatever the job involves, it starts the same way: a call, a scope, a price confirmed before anything is scheduled. We cover Dover with the same approach it brings to every service call.
Some electrical issues are easy to put off. A light that flickers occasionally, an outlet that stopped working in a room you rarely use - those get added to the list and sometimes stay there. Others are not optional. A breaker that will not reset, a burning smell near the panel, outlets that spark, or a total loss of power to part of the building are situations where waiting makes the problem worse.
We take short-notice work. When you call and describe what is happening, we go through the symptoms on the phone, give you a price, and get something on the schedule. For tenants and businesses that cannot simply go dark while a repair is worked out, we talk through the scope on the call so the visit is planned before anyone shows up. The work gets done without a drawn-out back-and-forth.
Scheduling an electrician shouldn't be complicated.
Call (603) 556-8248 and the appointment gets arranged on the same call, with the scope and price settled before we hang up.
Renovations and additions involve a sequence, and the electrical work has a specific place in it. Rough-in wiring - the circuits, boxes, and conduit that go inside the walls - has to happen before insulation and drywall close everything up. If the framing is done and the drywall is already hung, that work becomes significantly harder and more expensive.
The other side of the sequence matters too. Finish work, fixture installation, and panel connections happen after the walls are closed and the space is ready. Calling us early in the planning stage means the wiring fits the build rather than getting worked around it.
A common problem on renovation jobs is discovering mid-project that the existing panel cannot carry the new circuits the addition requires. That is a load calculation problem, and it is much easier to solve before drywall than after. We work through the panel capacity, the circuit requirements, and whether a subpanel or service upgrade is part of the scope before the project gets to a point where the answer is disruptive.
Contractors coordinating multiple trades can call us to work out the sequencing. We scope the electrical side of the job on the call and confirm what needs to happen and when.
A lot of the wiring in older Dover homes runs through spaces that were not designed with access in mind. Attics with low clearance, crawl spaces under additions, and unfinished utility areas all add time and planning to a job that looks simple from the outside. Getting to a junction box or tracing a fault in a wall sometimes means working through one of those spaces, and that changes how the visit is scoped.
We account for access when we talk through the job on the call. If the path to the wiring involves a tight crawl space or an attic run, that gets worked into the scope and the price before anything is scheduled.
High ceilings in living rooms, stairwells, and commercial spaces change what fixture installation and ceiling fan work involves. The same applies to exterior lighting at height - security lights, soffit fixtures, and floodlights mounted on tall walls or above garage doors. The job is straightforward, but the access plan is part of what gets discussed before we schedule it.
For exterior work, weatherproof installation and proper circuit protection are part of every job. Outdoor circuits need to be grounded correctly and protected at the outlet or the panel, regardless of where on the building they are located.
The price for any electrical job depends on what the job actually involves, and that is not always clear until we are into it. Three things tend to move a quote: what the fault turns out to be once the circuit is traced, what has to be opened up to reach it, and whether the existing panel or circuit can carry the change without an upgrade.
A straightforward outlet replacement in an accessible wall is a different job from the same replacement on a circuit that turns out to have a wiring fault three boxes upstream. A panel upgrade is scoped based on the current service level, the load the building is running, and what the service entrance can support. Load calculations are part of that process, not an add-on.
When you call, you get the rate on the phone. The price is confirmed before we schedule, and you are told what it covers. If the scope changes once we are on site, we explain what we found and what it adds before any additional work is done. Ask what it covers and you get a straight answer.
Dover has a significant stock of older housing, and older homes carry their own electrical history. The wiring that was correct when a house was built does not always match what the building needs now, and it does not always match current code. These are the situations that come up most often.
Three-way switches control a single fixture from two locations, and four-way switches extend that to three or more. Stairwells, hallways, and large rooms are the common applications. When one switch in a multi-location setup stops working, the fault is usually in the wiring between the switches rather than in the switch itself. We trace the circuit, find the fault, and rewire the run correctly.
Homes built in the 1960s and 1970s sometimes have aluminum branch-circuit wiring. Aluminum expands and contracts at a different rate than the devices it connects to, which can loosen connections over time and create a real risk at outlets and switches. Remediation means treating or replacing the connections at every device on the affected circuits. We assess the extent of the aluminum wiring on the call and scope the work from there.
Grounding and bonding are the parts of an electrical system that protect people and equipment when something goes wrong. A two-prong outlet in an older home is a sign that the circuit lacks a ground conductor. Bonding corrections come up during panel work, service upgrades, and inspections. Both are code-compliant wiring requirements, and we handle them as part of the broader job or as standalone corrections.
Properties in and around Dover that rely on well water need a dedicated circuit sized to the pump's startup draw, not just its running load. A pump circuit that is undersized or improperly protected causes nuisance tripping and can shorten the pump's life. We wire new pump circuits, replace failed ones, and assess whether the existing circuit is correctly matched to the equipment it feeds.
Recessed lighting layouts, pendant fixtures, ceiling fans, and LED retrofits all involve wiring decisions that affect how the circuit performs. Adding multiple recessed fixtures to a single circuit requires checking that the circuit can carry the combined load. Ceiling fan installation in a location that previously had only a light fixture sometimes requires running a new circuit or adding a switch leg. We scope the wiring side before the fixture goes up.
Workshop equipment draws hard on startup, and a welder or large compressor sharing a circuit with anything else is a problem waiting to happen. Dedicated circuits for this equipment are sized to the startup amperage, not the running draw, and the breaker is matched to the circuit. For garages and outbuildings, that sometimes means a subpanel rather than a long run back to the main panel. We work through the load and the distance on the call. If you would rather read than call, our electrical services page has the detail.
We cover Dover and the surrounding Strafford County area, including Madbury, Rollinsford, Durham, Somersworth, and South Berwick. Residential and commercial calls from any of these communities are handled the same way: scope the job on the call, confirm the price, and schedule the visit.
If your property is in one of these towns and you are not sure whether it falls within our area, call and ask. We cover the region, and the answer is usually yes.
Wiring work that goes through walls or floors produces some dust and debris. We work cleanly and clear the immediate work area before we leave. Jobs that involve opening walls or lifting boards are messier than surface-mounted work, and we discuss that with you before the work starts.
Heat at a faceplate usually means the connection behind it is under stress, either from a loose terminal, a failing device, or a load the circuit was not designed to carry. A discolored or scorched faceplate is a sign that heat has been building up for some time. Both are worth a call rather than a wait.
Yes. We handle residential and commercial electrical work throughout the area, including Madbury, Rollinsford, Durham, Somersworth, and South Berwick. The scope and pricing process is the same regardless of which community the property is in: the job is discussed on the call, the price is confirmed before anything is scheduled, and the visit covers what was agreed.
It depends on what is there. Some DIY work can be corrected with a straightforward fix. Work that is fundamentally unsafe or that does not meet the requirements for the circuit it feeds generally has to come out and be done correctly. We assess it on the visit and explain what the options are.
Older housing is common throughout the city, and that means knob-and-tube systems, aluminum branch-circuit wiring, and panels sized for loads far lighter than what a modern household draws are all situations we encounter regularly. The right starting point is a call to describe what you are seeing - flickering lights, tripping breakers, two-prong outlets throughout the house - and we go from there.
If the fault is upstream of the meter, it belongs to the utility company, and we will tell you that clearly on the visit. We handle the wiring on the customer's side of the meter. For faults on the utility's side, the call goes to the utility directly. We can help you identify which side the fault is on.
A burning smell from an outlet or panel, visible sparking, a breaker that will not reset after a clear overload, or a circuit that has gone dead in a way that affects heating equipment or refrigeration are all situations worth calling about promptly. We are available every day from 8:00 AM to 8:30 PM. If you are unsure whether something warrants a call, describe it and we will tell you what we think.
It depends on whether the panel has open slots and whether the existing service has enough capacity to carry the additional load. We check both before adding a circuit. If there are open slots and the load calculation supports it, we add the circuit without touching the rest of the panel. If there is no room or the capacity is already at its limit, an upgrade is part of the conversation.
Electrical problems that get ignored tend to get worse. A tripping breaker, a warm outlet, or wiring that has not been looked at in decades are all worth a call before they become something more serious. We are available every day from 8:00 AM to 8:30 PM.
Call (603) 556-8248.
The price is confirmed on the call, the visit is scheduled before you hang up, and there are no forms to fill out and no waiting for a callback. We power your home. We protect your circuits. We earn the call.
Towns a short way out: Durham, Eliot, Newmarket, Rochester, Kittery.
There is more on our town-by-town list.
From a tripped breaker to a full panel replacement, we handle the electrical work that keeps homes and businesses in Dover running safely. The table below covers what each service includes, who it fits best, and what is practical to know before you call. If a job does not fit neatly into one category, call us and we will scope it on the phone.
| Service | What's Included | Best For | Good to Know |
|---|---|---|---|
| Electrical Panel & Service Upgrades | Panel replacement and load calculationsService entrance upgrades to 200-ampDual-wire breaker terminal and corrosion remediationCapacity assessment for added circuits | Older homes with undersized panels, properties adding EV chargers or generators, and commercial clients needing more capacity | Panel work in New Hampshire typically requires a permit and inspection. We handle that process as part of the job so the work is documented and compliant when it is done. |
| Heat Tape Installation | Dedicated circuit for heat tapeOutlet and connection point installationPipe and roof edge locationsPanel load verification | Owners of older Dover homes with exposed plumbing in crawl spaces, along exterior walls, or in unheated basement runs | Heat tape draws a continuous load over extended cold periods. Running it on a shared circuit is a code and safety concern. We wire a dedicated circuit sized for the load. |
| Dedicated Appliance Circuits | Dryer, refrigerator, and dishwasher circuitsWorkshop and garage circuitsAC disconnect and dedicated feedChest freezer and microwave circuits | Homeowners adding a major appliance, finishing a garage or basement, or dealing with nuisance tripping on a shared circuit | A dedicated circuit prevents the nuisance tripping that happens when a major appliance shares a circuit with other loads. We size the circuit to the appliance on the call. |
Call (603) 556-8248 to get a quote, confirm the scope, and find out what the work involves for your specific property.
(603) 556-8248